Control Board Wiring

UPDATE: England's Stove Works pellet stoves are always improving, and this includes the Control Boards for the pellet stoves.
After all, the control board is the 'brain' of the stove!
Beginning in 2020, pellet stoves with the side-mounted control board (with the 0-9 touchpad) have Control Board PU-CB19.
Pellet stoves with the top-mounted (up & down arrow) board have Control Board PU-CB14.

Click Here to download the latest manual for your stove model.
The manual will explain control board operation, AND will include the Wiring Diagram for your stove, detailing how the control board hooks up to the various components.

If you still have any questions, contact us at (800) 245-6489 or by email.


Here are descriptions and information for our older (pre-2020 model) pellet stoves. Again, feel free to download the Owner's Manual for your stove to see more information:

  • The PU-CB93 was a knob-controlled circuit board that was used on stoves built in 1997 and prior. (Click here for PU-CB93 wiring chart)

  • The PU-CB98 was used on all units built from 1998 through 2003 - this is the "touchpad" control board used for stoves that do NOT have the "auto ignite" function. This board is also the replacement for the PU-CB93 board, should it need to be replaced. (Click here for PU-CB98 wiring chart)

  • The PU-CB04 is the version of control board used in all England's pellet units built 2004-2019. This board came into use in 2004 and is the control board used on the "auto ignite" versions of England's pellet units except the MAX/SUPER 240. (Click here for PU-CB04 wiring chart)

  • The PU-CB240-06 is the version of control board used in England's Max 240 pellet units. This board came into use in 2006 and is the control board used only on the England's MAX/SUPER 240 pellet units. (Click here for PU-CB240-06 wiring chart)

  • The PU-CBEP is the version of control board used in England's Evolution Pellet (EP) pellet units. This board is the control board used only on the England's 25-EP and 25-EPI pellet units. (Click here for PU-CBEP wiring chart)\

  • The PAH-CB09 is the version of control board used in England's Pellet Auxiliary Heater (PAH) pellet units. This board is only used on the England's Pellet Auxiliary pellet units.  (Click here for PAH-CB09 wiring chart)

  • The CPM-CB07/CPM-CB07A is the version of the dual control boards used in England's Multi-Fuel Stove. This dual-board configuration is only used on the England's CPM Multi-Fuel Stove.  (Click here for CPM-CB07 wiring chart)

  • The PU-CBIP is the version of control board used in England's Imperial Pellet (IP) pellet units. This board is only used on the England's Imperial Pellet units.  (Click here for PU-CBIP wiring chart)

Feb 23, 2022